Add card payment to a water filling station. The customer pays with a card or mobile wallet, fills the volume they need, and is charged for the liters dispensed.

Built for pump manufacturers and site installers who already have 12 V, a pump enable input, a flow meter, and a ready/session signal. Installation should be done by an electrician.

Features:

• Contactless card and mobile wallet payments (Visa, Mastercard, Apple Pay, Google Pay)
• Pay per liter — a small amount is reserved, then the final volume is charged
• Paylando Edge field controller with 4G and optional wired internet
• Payter Apollo terminal with a screen for the session
• Works with existing water stations — you keep your pump, meter, and cabinet

How it works

1. The customer taps a payment card or phone. A small amount is reserved.
2. They press the start button (or hold it) to fill water.
3. When they stop, the pump turns off and the reserved amount is adjusted to the liters actually filled.

Meter pulses from the station tell Paylando Edge how many liters were dispensed.

Interface

Customer field connector (MX3.0 2×3). Signals from the station:

• 12 V supply and GND
• Pump enable (relay pulls the station enable to GND)
• Pump ready / session active
• Meter pulses (volume)

Included in kit

• Payment terminal
• Paylando Edge field controller (4G, dual Ethernet, I/O)
• Controller harness (field connector + Apollo power)
• 12 V signal relay for pump enable

Installation

The installation should be done by an authorized electrician.

The station supplies 12 V. Size the supply for Paylando Edge and the Apollo terminal (Apollo up to 18 W).