Add card payment to a latrine / waste pump-out station. The customer pays with a card or mobile wallet, empties the tank, and is charged for the liters pumped from a boat, caravan, camper, or motorhome.

Built for marinas, campsites, and motorhome parks — and for manufacturers of pump-out equipment. You need 12 V, a pump enable input, a flow meter, and a ready/session signal. Installation should be done by an electrician.

Features:

• Contactless card and mobile wallet payments (Visa, Mastercard, Apple Pay, Google Pay)
• Pay per liter emptied — a small amount is reserved, then the final volume is charged
• Paylando Edge field controller with 4G and optional wired internet
• Payter Apollo terminal with a screen for the session
• Works with existing pump-out stations — you keep your pump, meter, and cabinet

How it works

1. The customer taps a payment card or phone. A small amount is reserved.
2. They start the pump and empty the tank from the boat, caravan, camper, or motorhome.
3. When they stop, the pump turns off and the reserved amount is adjusted to the liters actually emptied.

Meter pulses from the station tell Paylando Edge how many liters were pumped out.

Interface

Customer field connector (MX3.0 2×3). Signals from the station:

• 12 V supply and GND
• Pump enable (relay pulls the station enable to GND)
• Pump ready / session active
• Meter pulses (volume emptied)

Included in kit

• Payment terminal
• Paylando Edge field controller (4G, dual Ethernet, I/O)
• Controller harness (field connector + Apollo power)
• 12 V signal relay for pump enable

Installation

The installation should be done by an authorized electrician.

The station supplies 12 V. Size the supply for Paylando Edge and the Apollo terminal (Apollo up to 18 W).