Setting of prices for Vega 700/850 Vesiel

Open the door, insert the red key into the hole about 30 cm from the bottom of the chassis and turn it so that the cabinet works again.

There is a plastic cover on the door at the top left.

Remove it and behind it there are two cards with electronics on.

The card on the right is the one you set the programming on.

Press the round button at the bottom left.

It now appears on the display on the front of the door Password 00000 .

Using the keypad on the door, press button 3 until it flashes the last zero 00000.

Press button 1 so that it says 00001 then press button 9.

Now it says   Motortimeout.

Press button 1 until you reach Prices . Press button 9 and set Prices 00 to 000.00

Move the cursor by 3 increase by 1 decrease by 7 confirm by 9.

Ex is on Prices 00   000.10 Move by 3 until the cursor flashes below 000,10

Press 7 to decrease to zero confirm by 9. Now it says Prices 01 000,00.

I suggest you set it to 001.00

Move the cursor with 3 until it flashes below 00,00 press 1 to say 001, 00 confirm with 9.

Now it says Prices 02 000,00 Place the cursor under 000,00 and press button 1 until it says 002.00 and confirm with 9.

Then continue to change Prices so that it says the same price at the end as at the beginning.

Prices00 000,00                     Confirm 9

Prices01 001.00                     Confirm 9

Prices02 002,00                     Confirm 9

Prices03 003,00                     Confirm 9

Prices04 004,00                     Confirm 9

¯

Prices29,029.00                     Confirm 9

When it says Prices again, press 1 until you get to

Price-Selection press 9   Now it says All Prices 0? N . Confirm with 9.

Would it say All Prices 0? Y change to N using 1. Confirm with 9.

If you only have one spring in each compartment on the top three shelves, the odd numbers do not exist .

But then program only even numbers.

Now it says ex. B11 = price 00 press 9

Now it says B12 = price 00 Change using buttons 3.1 and 7 so that you get the price you want ex B12 = price 15 confirm with 9.

Then change the prices you want. If you do not want to change the price of eg B14 = price 20 press 9

12, 14, 16 and 18 are on the first (top) shelf.

22, 24, 26 and 28 is on the other shelf, etc.

When all programming is done, press the round button on the electronics card in the door and replace the plastic cover.